





RWE 750S Stainless Crossover Cat Back Exhaust
Tip Style
Optionen wählen
Tip Style
Tip Style
RWE McLaren 750S Performance Exhaust System
A car as capable as the McLaren 750S deserves an exhaust system engineered around performance first. The RWE 750S Exhaust System was developed to improve the way exhaust mass and pressure pulses move through the rear of the car while reducing unnecessary restriction, maintaining proper fitment and surviving the heat generated during serious track use.
At the center of the system is an oversized metal 3D-printed crossover that would be extremely difficult to manufacture with conventional bent tubing and welded merge sections. That crossover is the defining feature of the system. Its internal geometry allows the two banks of the M840T V8 to communicate through a large, smooth passage while giving us far more control over flow area, merge shape and pressure-wave interaction than a traditional fabricated X-pipe.
The complete system is manufactured in the USA from stainless steel and designed as a direct-fit exhaust for the McLaren 750S. It combines advanced additive manufacturing with conventional high-quality fabrication to create an exhaust built for airflow, thermal durability and repeated high-load use.
Performance first
Exhaust performance is about much more than how large the tubing is. The exhaust leaving each turbocharger is a rapidly changing combination of gas flow and pressure waves. Every bend, junction, area change and merge affects how that energy moves through the system.
On a twin-turbo engine, reducing restriction downstream of the turbine is especially important. The easier exhaust gas can leave the turbine outlet and move through the rest of the exhaust, the less unnecessary pressure the turbochargers have to work against downstream.
Our goal with the RWE system was to create a low-restriction path while also improving how the two banks interact with one another. Instead of treating the left and right exhaust paths as completely isolated tubes, the oversized crossover creates a controlled connection between them.
What the crossover actually does
The crossover gives exhaust pulses from either bank access to additional downstream volume rather than forcing every pulse to remain completely isolated within one side of the system. As exhaust pressure fluctuates between the two banks, the crossover provides another path for that energy to propagate.
This helps reduce localized pressure peaks and allows the exhaust system to use more of its total available cross-sectional area. The result is a more balanced downstream environment for the two turbochargers instead of two independent exhaust paths continuously experiencing their own pressure fluctuations.
There is an important distinction here between a turbocharged system and a naturally aspirated header. On a naturally aspirated engine, crossover and collector design can be heavily focused on timing reflected pressure waves back toward the exhaust valve to improve cylinder scavenging. The turbine wheel in the McLaren changes and attenuates those pulses before they reach the rear exhaust, so our objective is different.
Here, the crossover is primarily about managing post-turbine flow, pressure propagation and interaction between the two banks. We want to minimize unnecessary pressure drop, prevent abrupt changes in flow area and give the exhaust gases the smoothest possible path through the system.
Why such a large crossover?
A small crossover is relatively easy to package. A large crossover with meaningful internal area is not, especially in the extremely confined rear structure of a McLaren 750S.
We wanted the connection between the two banks to be large enough to actually become part of the exhaust flow path instead of functioning as little more than a small balance tube. Packaging that much crossover area while maintaining ground clearance, surrounding component clearance, exhaust alignment and OEM-style fitment was one of the most difficult parts of developing the system.
Conventional fabrication quickly becomes restrictive when the required geometry stops resembling simple round tubing. Creating the shape from individual bends and welded sections would require compromises in either internal area, transition quality, packaging or all three.
Metal additive manufacturing gave us another option.
3D-printed crossover geometry
The crossover is produced using metal 3D printing so its geometry can be designed around the available space and desired internal flow path instead of being limited by what can be bent from conventional tubing.
This allows us to create a large internal crossover while controlling the way each exhaust path enters, interacts with and exits the shared section.
- Large crossover area within extremely limited packaging space
- Smooth internal transitions between the left and right exhaust paths
- Controlled changes in cross-sectional area
- Reduced reliance on abrupt fabricated junctions
- More gradual internal merge geometry
- Consistent internal geometry from system to system
- Ability to optimize the internal flow path separately from the external packaging envelope
This last point is particularly important. With conventional tubing, the outside shape of the component largely dictates what the inside can look like. Additive manufacturing lets us work from the inside out, shaping the passage around flow requirements and then packaging the exterior around the car.
Pressure-wave and pulse management
Combustion does not create perfectly steady exhaust flow. Even downstream of the turbocharger, the system experiences continuously changing pressure as successive exhaust events send energy through the turbine and into the exhaust.
The crossover creates a communication path between those pressure fluctuations. When one side of the system experiences a higher instantaneous pressure than the other, the crossover provides another direction for that pressure energy and exhaust mass to move.
Rather than forcing each bank to repeatedly accelerate exhaust gas through its own isolated path, the crossover allows both sides to interact with a greater effective exhaust volume. The objective is a smoother, more balanced pressure environment downstream of the turbochargers.
That is why crossover geometry matters. A poorly shaped junction can create its own turbulence, separation and restriction. Simply connecting two pipes does not automatically make an exhaust better. The entry angles, available area, transition shape and downstream path all have to work together.
Reduced restriction after the turbochargers
For a turbocharged engine, the pressure relationship across the turbine is fundamental to how the turbocharger operates. Once exhaust energy has done its work driving the turbine, we want the gas to leave the turbine outlet and continue downstream with as little unnecessary restriction as practical.
The RWE exhaust was designed around that principle. Large, smooth flow paths and the oversized crossover help reduce abrupt restrictions while giving exhaust from either bank additional downstream capacity.
This becomes increasingly important as airflow and power increase. A stock car can benefit from a freer-flowing exhaust, but the value becomes even greater when additional boost, ECU calibration and other airflow modifications increase the exhaust mass the system has to move.
Why stainless steel?
We specifically chose stainless steel because this system was designed to live on cars that actually get used hard.
The rear exhaust of the 750S experiences extreme temperatures, repeated heating and cooling cycles, vibration and constant thermal expansion. Track use makes that environment considerably more demanding because the system can remain at elevated temperature for an extended period rather than seeing only brief acceleration events.
Stainless steel gives us an excellent combination of heat resistance, corrosion resistance, structural durability, repairability and fabrication consistency for this application.
- Thermal durability: Well suited to repeated high-temperature exhaust operation and thermal cycling.
- Corrosion resistance: Better long-term resistance to moisture, condensation and environmental exposure than conventional mild steel.
- Fatigue resistance: Appropriate for a system that repeatedly expands and contracts as exhaust temperature changes.
- Fabrication quality: Excellent material for precision TIG-welded motorsport exhaust construction.
- Serviceability: Can be inspected, repaired and modified using established motorsport fabrication techniques if a race or development program ever requires it.
We considered titanium, but for this system the lowest possible weight was not the only engineering requirement. Titanium can offer a meaningful weight advantage, but it also comes with tradeoffs in cost, fabrication, repairability and long-term behavior under repeated high-temperature cycling. On a tightly packaged twin-turbo McLaren that may see sustained track use, we placed greater value on thermal durability, serviceability and consistent structural performance over chasing the lightest possible exhaust at any cost.
The result is a system built to handle repeated heat, vibration and real-world use while still giving us the freedom to create the large crossover geometry and precise fabrication the design requires.
Made in the USA
The RWE 750S Exhaust System is manufactured in the USA. That matters to us for more than simply putting a country of origin on the product.
Keeping production close to our development process gives us greater control over fabrication quality, dimensional consistency and revisions as the system continues to be tested. These are low-volume performance components for an extremely specialized platform, and we would rather maintain tight control over how they are built than design a system and hand it off to anonymous mass production.
From the fabricated stainless sections to final assembly and inspection, the system is built around the same requirements established during development.
Proven in the environment we built it for
Our development work does not stop when a component fits on the car or survives a dyno pull. RWE components are tested in the kinds of high-stress environments our customers actually use them in, including sustained track driving where exhaust temperature, vibration and thermal cycling expose weaknesses very quickly.
That is especially important on the 750S. Packaging is tight, temperatures are high and the car is capable of sustaining a level of performance that places significant thermal load into every component surrounding the engine and exhaust.
The system has been developed around those conditions, not just street driving or short-duration testing.
Direct OEM-style fitment
None of that engineering matters if the exhaust does not fit correctly. The RWE system is designed as a direct-fit replacement using the vehicle's intended mounting architecture and packaging envelope.
Our goal was for the system to install like a component engineered for the car rather than a universal exhaust that happens to fit underneath it.
- Direct-fit McLaren 750S application
- No cutting or permanent vehicle modification required
- Designed around OEM mounting locations
- Proper clearance to surrounding vehicle components
- Designed to integrate with compatible factory-style upstream connections
Sound is the result, not the starting point
The exhaust absolutely changes the character of the 750S, but we did not begin the project by asking how to make the car louder. We started with flow, crossover geometry, packaging and durability.
The sound comes from those decisions.
Connecting the two banks through the large crossover changes how the individual exhaust pulses interact before reaching the outlets. Instead of hearing two largely independent banks, the crossover allows their pressure waves and frequencies to mix within the system.
The result is a more complex, aggressive exhaust character that better exposes the personality of the M840T without relying on restrictive chambers or artificial sound devices to create it.
Three exhaust tip configurations
The system is available with three different tip designs, allowing the final appearance to match the character of the car without changing the underlying exhaust architecture.
- Dual Straight Tips: A motorsport-inspired twin-outlet design with a clean, purposeful appearance.
- Single OE-Style Tip: A single-outlet configuration designed for customers who prefer a more factory-inspired appearance while retaining the complete RWE exhaust system underneath.
- Single Vented Tip: Our more distinctive single-outlet design featuring machined vent-style notches around the perimeter of the tip for additional visual detail.
All three options use the same core exhaust system, so tip selection is primarily an aesthetic decision rather than a change in the underlying performance package.
Designed to work with the complete RWE system
The exhaust can be used as a standalone upgrade, but it was also developed to complement our RWE Catted High Flow Downpipes for the 720S, 750S and 765LT.
Pairing the exhaust with our HJS 200 cell downpipes creates a complete post-turbo flow path built around the same philosophy: reduce unnecessary restriction, manage pressure transitions carefully, survive repeated high-temperature use and retain proper fitment throughout the vehicle.
For cars using both downpipes and ECU calibration, the system provides additional flow capacity as power and exhaust mass increase.
Key features
- RWE-developed performance exhaust for the McLaren 750S
- Performance-first crossover and flow architecture
- Oversized metal 3D-printed crossover
- Designed to improve communication and pressure balance between both exhaust banks
- Large effective crossover flow area despite extremely limited packaging space
- Optimized internal merge and transition geometry
- Reduced reliance on abrupt welded junctions
- Designed to minimize unnecessary post-turbine restriction
- Stainless steel construction
- Developed for repeated high-temperature and track use
- Made in the USA
- Direct OEM-style fitment
- No permanent vehicle modification required
- Available with Dual Straight, Single OE-Style or Single Vented exhaust tips
- Designed to complement RWE 720S / 750S / 765LT High Flow Downpipes
RWE engineered for the 750S
The 750S is an extraordinarily capable car, and we did not want to build an exhaust that was defined only by being louder or lighter than stock. The system needed to contribute something technically meaningful.
That is why so much of the development effort went into the crossover. Making a simple X-pipe would have been easier. Making a small crossover would have been easier. Building a crossover with the internal area and geometry we wanted inside the space McLaren gave us was not.
Metal 3D printing made it possible to create the shape we wanted rather than settling for the shape conventional fabrication allowed. Combined with stainless steel construction, direct-fit packaging and real-world track development, the result is an exhaust built to match the level of performance of the car it was designed for.

Full Service Available
RWE Motorsport is a top tier championship-winning race shop located in Southern California with a history of building high performing, reliable vehicles since 2011.
We pride ourselves on our commitment to delivering only the best performing, highest quality parts that are track and race proven.
A full line of services are available for your vehicle from installations to motorsport level racing builds.

