{"product_id":"mcs-hydraulic-lift-kit-hls-2-wheel-no-hoses-copy","title":"MCS Hydraulic Lift Kit (HLS) 4 Wheel (no hoses)","description":"\u003ch1\u003eMCS Hydraulic Front Axle Lift Kit\u003c\/h1\u003e\n\u003cp\u003eModern performance cars are getting lower, wider and more aggressive, which is great on track and not so great for steep driveways, trailer ramps and speed bumps. The MCS Hydraulic Front Axle Lift Kit solves that problem without giving up the ride height and geometry your car needs to work properly on track. Designed to integrate with Motion Control Suspension coilovers, this system gives you a push button nose lift solution that matches the quality and durability of the dampers underneath it.\u003c\/p\u003e\n\u003cp\u003eWhether you are daily driving, running frequent track days or moving cars on and off trailers, the lift kit makes living with a low splitter far easier while leaving your spring rates and damper behavior unchanged when it is not in use.\u003c\/p\u003e\n\u003ch3\u003eWhy Add a Hydraulic Front Axle Lift\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal world usability\u003c\/strong\u003e: Raise the front axle at low speeds to clear driveways, ramps and speed bumps that would otherwise scrape splitters and undertrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack focused stance\u003c\/strong\u003e: Run the ride height your alignment and aero package need without building in extra “safety” height just to survive city driving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimal compromise\u003c\/strong\u003e: When the system is not activated the lift assemblies sit fully compressed in the stack, so spring preload and damper behavior remain consistent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMCS level quality\u003c\/strong\u003e: Hardware, seals and lines are designed with the same motorsport mindset as MCS dampers, built for repeated use in demanding environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean integration\u003c\/strong\u003e: Compact components and a simple cabin control switch keep the installation tidy and easy to use day to day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow the MCS Hydraulic Front Axle Lift Works\u003c\/h3\u003e\n\u003cp\u003eThe system uses compact hydraulic cups mounted on the front damper assemblies, paired with a dedicated pump, reservoir and control hardware. When you press the lift switch at low speeds, hydraulic pressure extends the cups and raises the front axle, giving you additional clearance at the nose. Once you pass the obstacle, you lower the car back to its normal ride height and the cups return to their fully compressed position.\u003c\/p\u003e\n\u003cp\u003eBecause the lift components are designed to work with MCS coilovers, they maintain proper spring alignment and load paths. The result is a system that does what you need on the street without introducing unwanted noise or behavior when you are at pace on track.\u003c\/p\u003e\n\u003ch3\u003eWorks With Your MCS Coilovers\u003c\/h3\u003e\n\u003cp\u003eThe Hydraulic Front Axle Lift Kit is designed to be used with MCS damper packages on supported chassis. It can be:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdded to a new MCS kit ordered through us, so the full assembly is built and checked together.\u003c\/li\u003e\n\u003cli\u003eRetrofitted to an existing MCS suspension on cars where packaging and fitment allow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause space around the front suspension, brake lines and reservoirs varies by platform, we recommend contacting us with your chassis details and current setup. We will confirm compatibility, any additional parts required and the best way to integrate the lift kit with your existing MCS system.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Use\u003c\/h3\u003e\n\u003cp\u003eInstallation involves fitting the hydraulic cups to the front damper assemblies, routing lines and mounting the pump, reservoir and control hardware, then wiring the cabin switch. We strongly recommend professional installation, especially on track driven cars where routing and heat management are critical.\u003c\/p\u003e\n\u003cp\u003eOnce installed, operation is straightforward. At low speeds you raise the front axle before driveways, ramps or speed bumps, then lower the car again once clear. On track, the system remains inactive and the suspension behaves exactly like a standard MCS setup.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Street and Track\u003c\/h3\u003e\n\u003cp\u003eLike the dampers themselves, the MCS Hydraulic Front Axle Lift Kit is designed with long term serviceability in mind. Components are built to handle real use, not just occasional demonstrations, and can be inspected and serviced as part of your regular suspension maintenance.\u003c\/p\u003e\n\u003cp\u003eIf you are unsure whether this kit is right for your car or how best to integrate it with your MCS coilovers, reach out for a quick consultation and we will walk you through options, packaging considerations and what to expect from the system in daily and track use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* Kit does not include hydraulic hoses or complete car-fitment electrical. These components are vehicle-specific and dependent on your install location and must be developed separately by your installer.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation note:\u003c\/strong\u003e Custom hydraulic lines and wiring are required for installation.\u003c\/p\u003e","brand":"MCS","offers":[{"title":"Default Title","offer_id":48065604124824,"sku":"MCS-ACC-HLS4","price":4800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0600\/2878\/0696\/files\/MCS-Front-Axle-Lift-Cup.png?v=1763691671","url":"https:\/\/racewerkz.com\/de\/products\/mcs-hydraulic-lift-kit-hls-2-wheel-no-hoses-copy","provider":"RWE","version":"1.0","type":"link"}