{"title":"C8 Brakes","description":"","products":[{"product_id":"alcon-pro-system-chevrolet-c8-z06-front","title":"Alcon Pro-System C8 Z06 (Front, 19\"+ Wheels)","description":"\u003ch1\u003eAlcon Pro-System Front Brake Kit for the Chevrolet C8 Corvette Z06 w\/ 19\"+ wheels\u003c\/h1\u003e\n\u003ch2\u003eRace-bred, motorsport developed brake system for serious track and street use\u003c\/h2\u003e\n\u003cp\u003eThe Alcon Pro-System front brake kit is a motorsport focused upgrade for the Chevrolet C8 Corvette Z06, delivering higher thermal capacity, more consistent performance and greater confidence under heavy braking. Built around forged aluminum calipers and large two piece floating rotors, this system leverages Alcon's experience in GT and endurance racing and adapts it for demanding track and performance street use.\u003c\/p\u003e\n\u003cp\u003eAlcon and Pro-System design, test and manufacture these components in house, combining UK motorsport heritage with North American machining, dyno testing and bedding. The result is a balanced package that bolts to the factory knuckles, works with the stock master cylinder and ABS, and delivers a firm, repeatable pedal lap after lap.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePurpose built big brake kit with forged multi piston calipers and two piece floating rotors\u003c\/li\u003e\n\u003cli\u003eHigh carbon grey iron discs for thermal stability, friction and heat transfer\u003c\/li\u003e\n\u003cli\u003eDyno bedded rotors and pads so only a normal warm up is required before hard use\u003c\/li\u003e\n\u003cli\u003eFloating rotor mounting with anti rattle hardware for consistent pad contact\u003c\/li\u003e\n\u003cli\u003eDirectional internal vanes and slotted faces to improve cooling and wet weather performance\u003c\/li\u003e\n\u003cli\u003eDesigned to work with the factory master cylinder, booster and ABS for proper bias\u003c\/li\u003e\n\u003cli\u003eAvailable with hard anodized or electroless nickel plated (ENP) caliper finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eCaliper Finish Options\u003c\/h1\u003e\n\u003cp\u003eChoose between a hard anodized finish for a traditional motorsport look or an electroless nickel (ENP) finish that adds extra corrosion resistance and a distinctive metallic appearance that is easy to keep clean.\u003c\/p\u003e\n\u003ch1\u003eWhat Is Included\u003c\/h1\u003e\n\u003cp\u003eEach Alcon Pro-System kit includes calipers, two piece slotted rotors with aluminum hats, stainless brake lines, caliper brackets and all required mounting hardware. Components are pre assembled with floating hardware and supplied with dyno bedded pads so you can focus on driving instead of initial bed in.\u003c\/p\u003e\n\u003cp\u003eThe kit is designed as a direct fit with compatible wheels. Always confirm wheel clearance against the manufacturer’s template before final installation.\u003c\/p\u003e","brand":"Alcon","offers":[{"title":"Anodized \/ No Pads","offer_id":47302414958744,"sku":"ALC-C8Z-GT3BKF","price":5100.0,"currency_code":"USD","in_stock":true},{"title":"Anodized \/ Add Pads (+$290)","offer_id":48625730584728,"sku":"ALC-C8Z-GT3BKF-PADS","price":5390.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0600\/2878\/0696\/files\/Alcon-Pro-Systems-Brake-Kit_edf79a26-eaac-4ded-a3b2-a5c25191b707.jpg?v=1763760233"},{"product_id":"alcon-pro-system-chevrolet-c8-z06-rear","title":"Alcon Pro-System C8 Z06 (Rear, 19\"+ Wheels)","description":"\u003ch1\u003eAlcon Pro-System Rear Brake Kit for the Chevrolet C8 Corvette Z06 w\/ 19\"+ wheels\u003c\/h1\u003e\n\u003ch2\u003eRace-bred, motorsport developed brake system for serious track and street use\u003c\/h2\u003e\n\u003cp\u003eThe Alcon Pro-System rear brake kit is a motorsport focused upgrade for the Chevrolet C8 Corvette Z06, delivering higher thermal capacity, more consistent performance and greater confidence under heavy braking. Built around forged aluminum calipers and large two piece floating rotors, this system leverages Alcon's experience in GT and endurance racing and adapts it for demanding track and performance street use.\u003c\/p\u003e\n\u003cp\u003eAlcon and Pro-System design, test and manufacture these components in house, combining UK motorsport heritage with North American machining, dyno testing and bedding. The result is a balanced package that bolts to the factory knuckles, works with the stock master cylinder and ABS, and delivers a firm, repeatable pedal lap after lap.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePurpose built big brake kit with forged multi piston calipers and two piece floating rotors\u003c\/li\u003e\n\u003cli\u003eHigh carbon grey iron discs for thermal stability, friction and heat transfer\u003c\/li\u003e\n\u003cli\u003eDyno bedded rotors and pads so only a normal warm up is required before hard use\u003c\/li\u003e\n\u003cli\u003eFloating rotor mounting with anti rattle hardware for consistent pad contact\u003c\/li\u003e\n\u003cli\u003eDirectional internal vanes and slotted faces to improve cooling and wet weather performance\u003c\/li\u003e\n\u003cli\u003eDesigned to work with the factory master cylinder, booster and ABS for proper bias\u003c\/li\u003e\n\u003cli\u003eAvailable with hard anodized or electroless nickel plated (ENP) caliper finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eCaliper Finish Options\u003c\/h1\u003e\n\u003cp\u003eChoose between a hard anodized finish for a traditional motorsport look or an electroless nickel (ENP) finish that adds extra corrosion resistance and a distinctive metallic appearance that is easy to keep clean.\u003c\/p\u003e\n\u003ch1\u003eWhat Is Included\u003c\/h1\u003e\n\u003cp\u003eEach Alcon Pro-System kit includes calipers, two piece slotted rotors with aluminum hats, stainless brake lines, caliper brackets and all required mounting hardware. Components are pre assembled with floating hardware and supplied with dyno bedded pads so you can focus on driving instead of initial bed in.\u003c\/p\u003e\n\u003cp\u003eThe kit is designed as a direct fit with compatible wheels. Always confirm wheel clearance against the manufacturer’s template before final installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e For factory Stingray applications, we recommend pairing this kit with the RWE 19\"+ EPB kit.\u003c\/p\u003e","brand":"Alcon","offers":[{"title":"Anodized \/ No Pads","offer_id":47302415089816,"sku":"ALC-C8Z-GT3BKR","price":5000.0,"currency_code":"USD","in_stock":true},{"title":"Anodized \/ Add Pads (+$290)","offer_id":48625731010712,"sku":"ALC-C8Z-GT3BKR-PADS","price":5290.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0600\/2878\/0696\/files\/Alcon-Pro-Systems-Brake-Kit_edf79a26-eaac-4ded-a3b2-a5c25191b707.jpg?v=1763760233"},{"product_id":"rwe-x-alcon-c8-z06-full-kit-anodized-18","title":"RWE X Alcon C8\/Z06 Kit Anodized (18\" wheel capable)","description":"\u003ch1\u003eRWE x Alcon C8 Z06 Full Brake Kit | Anodized | 18 Inch Wheel Compatible\u003c\/h1\u003e\n\n\u003ch2\u003eRace bred braking, now packaged for 18 inch wheels\u003c\/h2\u003e\n\u003cp\u003e\nThe mid engine C8 Z06 is an incredible platform, but once you start leaning on it with real aero and slicks the factory brakes reach their limits quickly. \nThe RWE x Alcon C8 Z06 Full Brake Kit takes Alcon’s Pro-System technology and packages it specifically to clear popular 18 inch track wheels, giving you proper motorsport braking performance without being locked into oversized 19 and 20 inch tire options.\n\u003c\/p\u003e\n\n\u003ch2\u003eMotorsport hardware, tailored with RWE for the C8 Z06\u003c\/h2\u003e\n\u003cp\u003e\nDeveloped in partnership between RaceWerkz Engineering and Alcon, this front and rear system uses forged multi piston calipers and large two piece floating rotors engineered around the C8 Z06 chassis and electronics. \nRotor diameter, hat offset and caliper profile are optimized to clear 18 inch wheels while maintaining correct bias with the stock master cylinder, booster and ABS, so pedal feel stays confidence inspiring on road and circuit.\n\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePurpose built front and rear big brake kit for C8 Z06, engineered around 18 inch wheel fitment\u003c\/li\u003e\n  \u003cli\u003eForged aluminum calipers based on Alcon’s professional GT and endurance racing programs\u003c\/li\u003e\n  \u003cli\u003eTwo piece fully floating rotors with high carbon iron rings for thermal stability and repeatable performance\u003c\/li\u003e\n  \u003cli\u003eDirectional internal vanes and slotted faces to improve cooling, gas evacuation and wet weather performance\u003c\/li\u003e\n  \u003cli\u003eCaliper piston sizing matched to the OEM hydraulics and ABS for a firm, linear pedal\u003c\/li\u003e\n  \u003cli\u003eHigh performance pads included, bed in quickly on the car\u003c\/li\u003e\n  \u003cli\u003eStainless braided lines and high strength brackets included for a complete bolt on package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy 18 inch wheel clearance matters\u003c\/h2\u003e\n\u003cp\u003e\nBeing able to run 18 inch wheels on a C8 Z06 unlocks a wider range of motorsport tires, lowers consumable costs and gives you more sidewall support over curbs and bumps. \nThis kit was built around that goal from day one, not adapted later, so caliper and rotor sizing work with 18 inch barrels without compromising pad shape or thermal capacity.\n\u003c\/p\u003e\n\n\u003ch2\u003eAnodized finish and long term serviceability\u003c\/h2\u003e\n\u003cp\u003e\nThis version of the kit uses a hard anodized caliper finish for a classic motorsport look with excellent corrosion resistance. \nLike all Alcon Pro-System hardware, components are fully rebuildable with support and spares available, so you can service the kit rather than replacing it when it eventually wears.\n\u003c\/p\u003e\n\n\u003ch2\u003eWhat is included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFront and rear forged Alcon calipers in hard anodized finish\u003c\/li\u003e\n  \u003cli\u003eFront and rear two piece slotted rotors with aluminum hats, assembled with floating hardware\u003c\/li\u003e\n  \u003cli\u003eCaliper brackets and all required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eStainless braided brake lines\u003c\/li\u003e\n  \u003cli\u003eMatched performance brake pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\nIf you would like help choosing pads or confirming wheel templates, reach out and we can walk through your full C8 Z06 setup and usage to make sure this package is dialed for your car.\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Brake pads are included with this kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e For factory Z06 applications, we recommend pairing this kit with the RWE 18\"+ EPB kit.\u003c\/p\u003e","brand":"Alcon","offers":[{"title":"Default Title","offer_id":48187009695896,"sku":"ALC-C8Z-RWEFABK","price":10200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0600\/2878\/0696\/files\/2_1.jpg?v=1783977489"},{"product_id":"rwe-x-alcon-c8-z06-full-kit-enp-plated-18","title":"RWE X Alcon C8\/Z06 Kit ENP (18\" wheel capable)","description":"\u003ch1\u003eRWE x Alcon C8 Z06 Full Brake Kit | ENP Plated | 18 Inch Wheel Compatible\u003c\/h1\u003e\n\n\u003ch2\u003eRace bred braking with endurance spec ENP finish\u003c\/h2\u003e\n\u003cp\u003e\nFor C8 Z06 owners who live at the track or drive in all weather, the RWE x Alcon Full Brake Kit with electroless nickel plated (ENP) calipers adds an endurance racing level finish to our 18 inch compatible package. \nYou get the same RWE developed 18 inch wheel fitment and Pro-System performance, with a caliper coating that shrugs off heat, brake dust and harsh conditions.\n\u003c\/p\u003e\n\n\u003ch2\u003ePro-System hardware, optimized with RWE for 18 inch wheels\u003c\/h2\u003e\n\u003cp\u003e\nWorking directly with Alcon, we tailored rotor diameter, hat design and caliper packaging so this front and rear kit clears popular 18 inch track wheels while retaining proper bias and pedal feel with the factory hydraulics and ABS. \nThe result is a system that behaves like OEM in traffic but stays consistent deep into a track session, even on aggressive pads and tires.\n\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eForged multi piston Alcon calipers with ENP finish for excellent corrosion and chemical resistance\u003c\/li\u003e\n  \u003cli\u003eTwo piece fully floating rotors with high carbon iron rings and aluminum hats\u003c\/li\u003e\n  \u003cli\u003eDirectional internal vanes and slotted faces for cooling and gas evacuation\u003c\/li\u003e\n  \u003cli\u003ePiston sizing matched to the C8 Z06 master cylinder, booster and ABS tuning\u003c\/li\u003e\n  \u003cli\u003ePerformance pads included and ready to bed in on the car\u003c\/li\u003e\n  \u003cli\u003eStainless braided lines and precision machined brackets for a complete installation\u003c\/li\u003e\n  \u003cli\u003eEngineered around 18 inch wheel fitment so you can run common slick and semi slick sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy ENP plating\u003c\/h2\u003e\n\u003cp\u003e\nElectroless nickel plating offers strong corrosion protection, resists staining from pad dust and fluids and is easier to keep clean than raw or painted calipers. \nOn a hard driven C8 Z06 this means your calipers keep looking sharp and sliding hardware stays protected through heat cycles and repeated service.\n\u003c\/p\u003e\n\n\u003ch2\u003eWhat is included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFront and rear forged Alcon calipers with ENP finish\u003c\/li\u003e\n  \u003cli\u003eFront and rear two piece slotted rotors with assembled floating hardware\u003c\/li\u003e\n  \u003cli\u003eCaliper brackets and all required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eStainless braided brake lines\u003c\/li\u003e\n  \u003cli\u003eMatched performance brake pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\nAs with all of our RWE x Alcon packages, we are happy to consult on pad choice, fluid and wheel fitment to make sure this kit works with your specific C8 Z06 build and driving plans.\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Brake pads are included with this kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e For factory Z06 applications, we recommend pairing this kit with the RWE 18\"+ EPB kit.\u003c\/p\u003e","brand":"Alcon","offers":[{"title":"Default Title","offer_id":48187009728664,"sku":"ALC-C8Z-RWEFEBK","price":12500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0600\/2878\/0696\/files\/C8-Z06-Alcon-Brakes-1.jpg?v=1773614199"}],"url":"https:\/\/racewerkz.com\/de\/collections\/c8-brakes.oembed","provider":"RWE","version":"1.0","type":"link"}